NOT SOLVED! vserver client error 9

[Kevin Windham]

On Wednesday, May 7, 2003, at 10:06  AM, Keith DeLong wrote:
> Just to be clear. You'll need to quit and restart the IDE for the 
> AppleTalk
> setting to be recognized by RB. I'm hoping this was a missed step and 
> the
> nightmare can end :-)
>
> My exact steps were:
>
> 1. Turn AppleTalk on.
> 2. Start Server (already configured)
> 3. Start RB with Single Table Project (from 17 client)
> 4. Run from IDE -- error 9
> 5. Quit RB
> 6. Turn AppleTalk off.
> 7. Start RB with Single Table Project (from 17 client)
> 8. Run from IDE -- no errors :-)
>
> Can others confirm or deny this behavior?
> Here's the Mac V4RB links for you busy people:

Thanks for the links. You made it so easy for me, I couldn't resist a 
test run. :-)

I downloaded and configured the server. I am running RB 4.5.2. Ran the 
test project. Got the error 9. I usually keep AppleTalk running, so it 
was active for the first test.

I quit the server, quit the IDE, and turned AppleTalk off. I then 
re-ran the server and test project in the IDE. Worked Fine.

So I can confirm that the AppleTalk setting is somehow involved. I am 
running under OS X 10.2.6.

Hope that helps Ruslan.

Kevin