Stay connected to vserver with Xojo

[william humphrey]

Try testing vStudio with a server on your local network and then
physically disconnect the server and see what happens. It should not
crash or freeze. If it does please report to Valentina Mantis.

On Wed, Nov 27, 2013 at 3:59 PM, william humphrey
<bill at bluewatermaritime.com> wrote:
> I went through a very similar problem with Livecode and found out that
> the app crashed on re-connect after timeout because I was using calls
> for data that used "vCursor" and I was not destructing every single
> last one of them.  After I tracked them all down the reconnect crashes
> went away. It seems that the unrestricted vCursor app behaves like
> another instance of the database being open so when you open the
> database again after the timeout closing you end up with an odd second
> database being open too.
>
> I'm not sure if I'm explaining this correctly as I don't completely
> understand. So even though using vCursor calls is way much faster than
> vTable calls you have that problem of being sure that you destroy each
> one right after using it. This wasn't documented in the V4REV
> documentation at all.
>
> On Wed, Nov 27, 2013 at 3:29 PM, Joseph Morgan <joseph at checkos.com> wrote:
>>
>>
>> I found "Idle timeout in minutes".
>>
>> Thank you for that. I will try it.
>>
>>
>> What if the network connection is lost, do you know of an elegant way to deal with that without freezing the app?
>>
>>
>> Thanks again!
>> Joseph
>>
>> On Nov 27, 2013, at 1:05 PM, william humphrey <bill at bluewatermaritime.com> wrote:
>>
>>> You need to edit line in server_x64.ini (in the server folder). This
>>> line shows how long until timeout. I'm a little confused about how it
>>> works exactly because you will read there that it says "0" is infinite
>>> time out but actually I've found that it works better to just put a
>>> big number there.
>>>
>>> On Wed, Nov 27, 2013 at 2:48 PM, Joseph Morgan <joseph at checkos.com> wrote:
>>>> I want to run my app on several pc's/macs in my shop and always stay connected.
>>>>
>>>> How are you guys staying connected to Vserver in your Xojo/Realbasic apps?
>>>>
>>>> It seems that after some time (maybe hours later) the connection is no longer working and we get a frozen app.
>>>>
>>>> This may be due to a computer falling asleep or even the server falling asleep.
>>>>
>>>> So I figured I could check the Vconnection, but the app is non-responsive.
>>>>
>>>>
>>>> Thank you!
>>>> Joseph
>>>> _______________________________________________
>>>> Valentina mailing list
>>>> Valentina at lists.macserve.net
>>>> http://lists.macserve.net/mailman/listinfo/valentina
>>>
>>>
>>>
>>> --
>>> http://www.bluewatermaritime.com
>>> _______________________________________________
>>> Valentina mailing list
>>> Valentina at lists.macserve.net
>>> http://lists.macserve.net/mailman/listinfo/valentina
>>
>> _______________________________________________
>> Valentina mailing list
>> Valentina at lists.macserve.net
>> http://lists.macserve.net/mailman/listinfo/valentina
>
>
>
> --
> http://www.bluewatermaritime.com



-- 
http://www.bluewatermaritime.com