Vserver connection

[Richard McCoy]

Okay. My UN/PW is admin level. There's no other to use. Works fine with FTP, 
Remote Desktop, and all Administrator tasks (such as disabling or 
configuring Firewall). Will have to establish why Vserver doesn't like it.

Will send latest log file.


----- Original Message ----- 
From: "Richard McCoy" <mcrmedia1 at insightbb.com>
To: "Valentina Developers" <valentina at lists.macserve.net>
Sent: Monday, January 11, 2010 12:26 PM
Subject: Re: Vserver connection


> Thanks. Examined log. It's reporting the wrong username and password. It's
> connecting but then disconnecting. I'm using Remote Desktop to administer
> the server and used my UN/PW from there, the same one used for FTP. 
> Assuming
> I need a separate Administrator UN/PW, if available. IP and port are
> correct. Have contacted IS.
>
> Does this make sense?
>
>
> ----- Original Message ----- 
> From: "Ivan Smahin" <ivan_smahin at paradigmasoft.com>
> To: "Valentina Developers" <valentina at lists.macserve.net>
> Sent: Monday, January 11, 2010 11:45 AM
> Subject: Re: Vserver connection
>
>
>> Hello Richard,
>>
>> Monday, January 11, 2010, 6:24:41 PM, you wrote:
>>
>>> I'm trying to connect to my server using StudioPro 4.3. I've
>>> installed Vserver and my Office NFR license. The Vserver is started
>>> and working properly. So far so good.
>>>
>>> I've turned OFF my firewall so that there is no interference. I've
>>> opened StudioPro/Server/Connect to.../ and filled in the correct
>>> information.
>>>
>>> DataSource:        Valentina Server
>>> Host:                    My Server IP
>>> Port:                    15432
>>> User:                    My Server Username
>>> PW:                      My Server Password
>>> Signature:              Not required
>>>
>>> I click "Connect" and receive an error message: "Connection could not be
>>> established."
>>>
>>> Alternatively, I've tried making Vserver and port 15432 exceptions.
>>> That hasn't worked either. As far as I can tell nothing else is using
>>> this port.
>>>
>>> As an additonal test I set up an FTP port and tried to connect to
>>> it using a third party program (SmartFTP). No problems there, connects
>>> every time.
>>>
>>> The only inconsistency I can see right now is that the StudioPro
>>> Datasource is "Valentina Server" while the server's name is
>>> "Vserver_Office", but there's no way to change the name in StudioPro.
>>
>> Firstly   set  VerboseLevel=3;  in  vServer ini. Then start server and
>> check  the  log  -  is there any records on attempt to connect it from
>> vStudio?
>>
>> The possible reasons are:
>> 1. Firewall
>> 2. Wrong IP
>> 3. Wrong port
>>
>> are  you  connecting  to  vServer  from  this  host or it is different
>> computer?
>>
>> Send me please vserver log and vStudio connecting dialog snapshot.
>>
>>
>>
>> -- 
>> Best regards,
>> Ivan Smahin
>> Senior Software Engineer
>> Paradigma Software, Inc
>> Valentina - The Ultra-Fast Database
>> http://www.valentina-db.com
>>
>> _______________________________________________
>> Valentina mailing list
>> Valentina at lists.macserve.net
>> http://lists.macserve.net/mailman/listinfo/valentina
>
> _______________________________________________
> Valentina mailing list
> Valentina at lists.macserve.net
> http://lists.macserve.net/mailman/listinfo/valentina