2.4 Addrecord() speed

[Christer Olsson]

>On 8/1/06 10:59 PM, "Russ Tyndall" <fitzbew at nc.rr.com> wrote:
>
>>> Well, please do next:
>>> 
>>> 
>>> * stop 3 servers
>>> 
>>> * in the ini file set VerboseLevel = 3
>>> 
>>> * run them each after each
>>> 
>>> * run your test with loop.
>>> 
>>> * stop a server
>>> 
>>> Send me please 3 log files of each server. Note that log file show time up
>>> to milliseconds for each command.
>>> 
>>> So we must be able easy compare logs
>>> 
>> 
>> 
>> Ruslan, 
>> 
>> I apologize for not being clear, but I only have 1 copy of vServer running
>> on a X.4.7 machine.  I'm seeing the speed slow-down/diffs while connecting
>> TO that machine FROM other machines on my local network.
>> 
>> This is why I think it is so odd that the machine that hosts vServer is the
>> *slowest*, even though I am running my RB client app ON that machine.
>> 
>> Still, I will follow your instructions but just for 1 vServer.
>
>Aha, 
>
>Then only speed of client app itself can affect this.
>Then you need check if DebugLevel is the same ..
>Puzzle. 

Might be a problem with the MTU of the loopback, since you have changed the protocol to be packed based now.

Russ: when running your client on the server; are you connecting to localhost/127.0.0.1 or the real IP address of the server? Try to change the MTU of the loopback to 1492 (sudo ifconfig lo0 mtu 1492) and make your test again and see if it makes any difference.
-- 

  *************************************************************
  Christer Olsson   PO Box 9160        Phone +46 40 25 85 85
  Ljusa Idéer AB    SE-200 39 Malmo    Fax +46 40 25 85 89
  Kantyxegatan 5    Sweden             http://www.ljusaideer.se