[V4RB] Bus error

[Christer Olsson]

>On 8/1/06 3:41 PM, "Christer Olsson" <christer at ljusaideer.se> wrote:
>
>>> I have start server in console, with verbose level = 3
>>> 
>>> Open example V4RB/Examples/SQL/ Records_AddDeleteUpdate
>>> 
>>> In the Project -> ExampleTools ->Init() set gClient = true
>>> 
>>> * Run example, - it create db on server
>>> 
>>> * click button "SELECT" -- it create SERVE SIDE cursor.
>>>    then I am able add records, navigate them..
>>> 
>>> Please try all this on your side.
>>>    INTEL   ?
>>>    G4      ?
>> 
>> Running your example on my Macbook Pro intel works fine. Good.
>> Running our own app on my Macbookpro results in bus error. Bad.
>
>Wait, 
>
>Both your lines say about Macbookpro ? Or one is intel second is PPC ?
>
>But I work on G5 PPC..and it works here.
>Please clarify

Yes, both tests mentioned above is run on Macbook Pro (which is only available with intel processor).

But my original tests were made with client on Macbook Pro and server on the same Macbook Pro and server on G4 PPC.

>> It's hard to debug when you don't get any more error message than "bus error".
>> Any thoughts of where to look in our code?
>
>Bus error in SERVER, right? So this is not your code I think..

Yes, the bus error is in server.
-- 

  *************************************************************
  Christer Olsson   PO Box 9160        Phone +46 40 25 85 85
  Ljusa Idéer AB    SE-200 39 Malmo    Fax +46 40 25 85 89
  Kantyxegatan 5    Sweden             http://www.ljusaideer.se