[V4RB] 1.x Open() Delay in Win32

[Ruslan Zasukhin]

On 4/7/06 1:55 AM, "Russ Tyndall" <fitzbew at nc.rr.com> wrote:

> 
>> 160 MB? This is more than enough. Usually 10-30 is ok
> 
> I don't know, I read or dreamed somewhere that 1/2 RAM was good rule of
> thumb for Valentina cache.  I came up with that value probably 2+ years ago.

Right this was few years ago.

Today computers have a lots of RAM. Of course you have quite big dbs
100-300MB. So bigger cache will help you. If you okay to use so many RAM of
computer - no problems.

Also -- 1./2 of RAM -- this is MAXIMAL cache you can have.
If you ask more Valentina will use 1/2 of RAM.

> I tested up to about 1 gig, but didn't help this slow-opening issue.
> 
> I'll try and send you a project with a db so you can see this problem with
> your own eyes, and perhaps find some solution.  I'll feel some sense of
> relief knowing that you can duplicate it.

ok

-- 
Best regards,

Ruslan Zasukhin
VP Engineering and New Technology
Paradigma Software, Inc

Valentina - Joining Worlds of Information
http://www.paradigmasoft.com

[I feel the need: the need for speed]