V4MD_client problem

[Gregory Kowalski]

On Aug 18, 2004, at 5:23 PM, valentina-request at lists.macserve.net wrote:

>
>>>> I am testing the Valentina server and am having navigation problems.
>>>>
>>>> The problem occurs  with V4MD_client and is very basic:
>>>>
>>>> The cursor does not remember the position when using "gotorecord()".
>>>>
>>>>
>>>> Here is a very simple test I made:
>>>>
>>>> 1. I created a database with ten records.
>>>>
>>>> 2. I start at record 1.
>>>>
>>>> 3. I use "gotorecord()) to go to record 5 - record 5 appears.
>>>>
>>>> 4. I then hit "nextrecord" and guess what?  it goes to record 2
>>>> instead
>>>> of record 6.
>>>>
>>>> Try it, it is a very simple test.
>>> I tried it and all works fine.
>>> Please, make sure you use the latest version of V4MD Client & Server.
>>> If I recall correctly, this problem was already fixed in one of the
>>> latest
>>> build of V4MD_Client.
>>>
>>> -- 
>>> Best regards,
>>> Igor Gomon
>>>
>>
>> I did the test again with latest version of V4MD_Client and it still
>> does not work...
>> I forgot to mention that the problem occurs with Kclient_side. (try 
>> it)
>>
>> If I use Kserver_side it works OK only it is much much much much 
>> slower.
>>
>> I test it on a project where use a loop to populate a table with 10
>> rows and 9 columns.
>>
>> When using Kserver_side  the rows appear one by one at about 1/2 
>> second
>> interval, sometimes more. It's very uneven...
>>
>> With KClient the results appear instantly, but eventually everything
>> falls out of place due to the above-mentioned problem.
>>
>> With V4MD xtra everything works very well and very fast.
>
> Greg,
>
> I think you should send to Igor some project for testing
> (for Windows).
>
> Do you use BLOB/TEXT/Picture fields in that table ?


Yes, I use 2 TEXT fields.

I'd be happy to send him the project, although it's a bit large (30.000 
records) but it is MAC OSX.

Greg