Thanks Ivan<div><br></div><div>How do I issue "flush" command from LiveCode? This is important because clearly the auto-flush setting must be different now than the old default setting.</div><div><br></div><div>default is:</div>
<div><br></div><div><div>; 1 - Flush after any data modification.</div><div>; 0 - Default value - no flushing.</div><div>FlushEachDataChanges=0</div><div><br></div><div>I will try a setting of "1" and see if that bothers me. If not than there is no need to do autoflush command on a less regular basis from LiveCode.</div>
<div><br></div><div>Do you know if the old setting was flush after every data modification? I look at my old ini and don't even see a flush data modification setting.</div><div><br></div><div>Bill</div><div><br></div>
<div><br></div><br><div class="gmail_quote">On Sun, Dec 26, 2010 at 7:18 AM, Ivan Smahin <span dir="ltr"><<a href="mailto:ivan_smahin@paradigmasoft.com">ivan_smahin@paradigmasoft.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex;">
1. Flush command issued (Pay attention to auto-flush vServer mode -
see vServer's ini settings)</blockquote></div><br><br clear="all"><br>-- <br><a href="http://www.bluewatermaritime.com">http://www.bluewatermaritime.com</a><br>
</div>